InWin PCI-E Riser Cable 4.0 & BracketShowcase your GPU in all its glory. Use InWin PCI-E Riser Cable & Bracket to mount GPUs vertically. PCI-E 4.0 provides double the bandwidth of PCI-E 3.0!
InWin PCI-E Riser Cable 4.0 & Bracket
PCI-E 4.0 x 16
Showcase your GPU with this vertical mount kit!
The bracket allows users to install graphics cards vertically to a case that doesn’t have a preset vertical mount.
InWin 4.0 Riser Cable is fully compatible with Intel and AMD motherboards. It supports transfer rates of 16 GT/s and has a bandwidth of 32 GB/s.
Chassis must have at least 6 PCIe slots. Install the bracket as shown in the pictures.
The Riser Cable cannot be properly installed if a solid, metallic strip is above the PCIe slots.
Please ensure no shorts have occurred due to poor PCI card placement. To prevent from damaging the cable, please do not fold the PCI-E cable during installation.
|Model||PCI-E Riser Cable 4.0 & Bracket|
|Interface||16 x PCI-E 4.0
90 Degree Right Angle Riser Adapter Card
|Cable Length||250 mm|
|Materials||PCB, FR4, Polyethylene(PE), Copper Alloy|
|Temperature Range (°C)||-20 ~ 80 °C|
|Net Weight||440 g|
|Gross Weight||480 g|
|* InWin products comply with RoHS regulation.
* Specifications may vary based on different regions.
PCI-E Riser Cable 4.0 x 1
Vertical VGA Bracket x 1
Screws x 5
Standoffs x 3
Standoff Setter x 1